App to sd CARD Eclair Xperia X10

connect many who asked for an article on installing applications to the SD card. and I know given the way ..... tips from friends I have managed to installl to the SD card ... just ....


For those who do not know what it is app2sd (application to sd card) which means that the application would have been stored to the sd card automatically and of course save the internal memory resources X10 agan.

What are the benefits?
The advantage is that ...


* X10 agan so more smoothy, because the internal memory resources only focus for the OS and system files only, so the performance of the Android OS is faster and lighter.

* X10 agan have a swap file is specified (LINUX), which aims to improve and help the performance of RAM (384 MB RAM X10)

* X10 agan have some sort of balancing method, which means that if the files in the application load, the other partition will replace. And it also helps the course of an app so much smoother (without fear even though sdcard SDHC Class 2)




Attention!
The risk is huge if something goes wrong borne own risk, not by gw yaw ......


* SD card agan jd crash, partition became corrupted, agan must automatically reset to correct partition.

* Error inject via adb shell script can also result in HP dead, and require you to eclair and me re-rooting X10 agan.

* No risk of fatal to HP so badly damaged in hardware, if there is damage to the software, simply re-flashing and re-rooting




That's a natural ane first tried it .. but ane like, so ane bs evaluation where my mistakes and grow understand

And of course the end result ... very satisfied! Honestly, recommended for those who want to feel a HP smoothy without the slightest lag and unused cm internal memory of 465 MB 170 MB (36%) for the default system application HP sajs Whereas before in-app2sd around (70%) in the HP ane .. number of 123 applications installed apps. Yes most big size 20 MB Google Earth. Calculated happen .. 327 MB. And 170 MB it will continue like that .. even though we install and install more applications.

Preparation:
Download the following files and install on your PC:


* Partition Wizards Home Edition

* Android SDK (using such tools adb)




And the following files in the download to be installed on your mobile phone:


* Busybox (at market)

* Donate TitaniumBackup Version




Steps:
Use Partition Wizards to partition the sd card agan (but before, make sure all the contents of the backup on sd card company agan agan)
Partitionnya division must correctly and in sequence, can not reverse order:


* FAT32 (primary)
FAT32, at least 2 GB, and the maximum is not determined.

* Ext2 (primary)
ext2 minimum of 1.4 GB, and a maximum of 2 GB only.

* Swapfile (primary)
swapfile 2 / 3 times the size of RAM. So 3 / 2 * 384 MB = 576 MB.




Okay, how to partition sd card:


* Make sure the HP agan connected via usb and the usb mode in the circumstances, alias sd cardnya can be read from windows explorer.

* Make sure all the contents of the X10 agan sd card, both show and hidden full backup on my hard drive PC / laptop agan.

* Make sure that you partition the sd card, not the drive or hard disk agan

* Delete the partition on the sd card agan, with a click right from the software "Partition Wizards Home Edition (PWHE)"> delete.

* Partisilah one by one until the division is completed according to the instructions of each partition size and MUST be sequential. Follow this way for the details.




Preparation of HP X10 agan:


* Make sure X10 is installed busybox agan and TitaniumBackup Donate Version and have a full backup with a batch of all content files X10 app + sys agan.

* Make sure X10 is running busybox app agan dr X10 agan, and then select OK to install until the status is displayed so HP X10 agan.





App2sd installation steps 2.1 to HP X10 Eclair agan:
Download and Extrack app2sd2.1.zip to the sd card that has been partitioned before. DO NOT in a folder, make sure the place is empty at the sd card.
Ok, now run adb tools via the Android SDK and of course, HP is already connected to the usb in a state of perfect debugging mode
And the following command:
Click start> run> cmd and move (cd - change directory) to the Android SDK tools folder.
If you already .. type in the following quote:


If it should appear like this article


Select 0 and press enter. Then wait until the process is completed, it takes about 6-10 minutes and it also depends much on the internal memory app agan .. because at the moment ..
app2sd who had been assigned to replace the path in the ext2 partition on the internal memory to a path now ext2 partition on the sd card. And all the app on ext2 internal memory has been cut into ext2 sd card. So so long

Wait and wait till finished .. .. just ignore the message if there is denied, error, etc. .. just wait until HP restart itself.

RELATED POST: